Your cart is empty
- The plowshare anchor is suitable for a wide variety of anchoring grounds - Features: deep digging and high holding power - ideal for bow rollers - Forged shaft and joint, welded blades - Hot-dip galvanized.
- Deck cleats in stainless steel - with four mounting holes.
Sailing ring with loop for securely fixing sails to a boom or railing. The 25 mm wide contact surface protects the sailcloth, while the 10 cm long, twisted loop allows for easy handling.
Protects the boat from damage upon contact with the dock or mooring, the dock fender significantly dampens the impact, thus preventing damage to the boat upon contact with the boat fender, the boat can glide and remains maneuverable offers …
Robust forestay fitting HS made of high-quality stainless steel for securely attaching the forestay to the bow of sailboats.
Classic duffel bag in a nautical design with decorative flag detailing – ideal for sailing, boating trips, and leisure activities.
Waterproof spray top for sailing and watersports. Extremely waterproof and highly breathable, made from lightweight, thin material.
Allpa thermomagnetic fuse 135A
- Made of perlon fabric - Dimensions 30 x 20 cm - with loop and ribbon.
The Spirit 1.0 is designed for tenders, inflatable boats, dinghies, and sailing yachts up to 1500 kg and offers comparable thrust to a 3 hp gasoline outboard motor.
"DF200ATL DF200ATX DF200AZX Gewicht: L 235g X 240 kg Schaftlänge: L- 508 cm x – 635 cm Propellersteigung: 15“-27,5“(RR) 17“-26“ (CR) Farbe: Schwarz (opt. weiß) Hubraum: 2867 cc Leistung (kw/ PS): 147,7/200 Bohrung x Hub: 97 x 97 Schaltung …
Powerful, mobile compressor technology with 55 l volume for reliable cooling • Robust design for use in leisure, camping and outdoor adventures • Precise temperature control for optimally cooled food and drinks • Energy-efficient operation …
- Fecal chopper pump - Lifting height up to 1.5 meters. Hose Ø: E38-A25mm Flow rate: 50l/min Version: Pump Voltage: 12V
Design: with counter plate Material: Niro
- Polyester resin is suitable for laminating, reinforcing and sealing holes and damage where quick repair is important - to be used in conjunction with fiberglass mats for manual repairs of damage.
- The "eye-catcher" at the sailor's table - Solid cast brass - Stable. Material: Brass
- Classic sun protection material - Sun protection factor 80 UV Standard 801 - Backing material 100% PES - Acrylic/Teflon coated on one side - High strength, stable and climate-resistant (-20 to +70 °C) - Water-repellent grade >80 - Lightw …
- Special life jacket for the dog with extra carrying handle - Reflectors and zippered pocket.
- Aluminum trolley for Optimists - with pneumatic tires and the BOW WOW claw.
- For all engine cooling systems and 2-circuit cooling systems - For winterizing the cooling circuits of the engine, refrigerator and generator - With inhibitors for corrosion protection and good foaming behavior - Nitrite and amine free - …
Triple action for high pressure Quick and effortless pressure build-up up to 30 psi The switch on the front allows you to switch between 3-2-1 stroke pump functions
The Allroundmarin Scout 330 with aluminum floor is the rock in the surf for your biggest adventures and built extremely stably. It handles high payloads and offers an absolutely flat standing surface for safe operation in the boat. The target group for this model is anglers who require a maximum of robustness for large waters and a lot of equipment.
Ultraleichtes Schlauchboot mit stabilem Aluminium-Rumpf für Törns, Hafenmanöver und Ausflüge auf See oder Binnengewässern. Komfortabler weicher Boden, hohe Stabilität und leichtes Handling. Robust verarbeitet, einfach zu transportieren und ideal für Crew, Skipper und Wassersport.
Suitable for the following motor/gearbox types: 3.0L ALPHA ONE - 3.0L GM 181 I/L4 3.0L/LX ALPHA ONE - 3.0LX GM 181 I/L4 1996-1997 3.0L MPI EC - 3.0L MPI EC 3.0L TKS ALPHA PLUS SERIES - 3.0L TKS Plus 3.0L/LX ALPHA ONE - 3.0L GM 181 I/L4 1 1 …
YAMAHA SERVICE KIT F50/F60/T60 (05) + F115 (00-05) 100HRS (8M0222280)
Genuine Suzuki Maintenance Kit for DF60/DF70 Outboard Engine Year 2008-2009 (Early) Content: 1x Repair Kit Water Pump 1x Oil Filter 4x Spark Plug 1x Shear Pin 2x Gasket 10x17x1.5 1x Gasket 12.5x20x2.5 1x Anode 1x Gasket 1x Gasket Water Pum …
Suitable for the following Volvo Penta engines/transmissionsD11C1-A MP D11C3-A MP D11C2-A MP D11C4-A MP D11B3-A MP D11B4-A MP D11A-A D11A-B D11A-C D11A-E D11B2-A MP D11A-D MP D11A-E MP D11B1-A MP D9A2L MH D9A2M MP
- Bow thruster motor unit - 12 and 24 V - 4.4 kW - 2 propellers (5 blades) - 185 mm tunnel diameter - 80 kg thrust - for boats from 35 to 48 feet - Gearbox: seawater-resistant bronze, fully CNC machined, 100% dimensional accuracy - Encapsu …
- This set consists of all anodes that are installed on the respective drive - Suitable for Volvo Penta SX and SX-M - Only suitable for fresh water
Versatile and compact stainless steel fridge-freezer combination from the OCX2 series • Flexible adjustable single compartment that can be switched from fridge to freezer or back again at any time • New LED thermostat for precise temperatu …
- Flagstick holder for railing tube (Ø 20 to 25 mm) - Chrome-plated brass - with knurled screw to secure the flagstaff.
Be the first to review this product.
No reviews yet.
No questions yet.
- Chrome-plated brass - 10° inclined - With knurled screw to secure the flagstick - 3-hole mounting. Version: 10° inclined
- Flagstick Niro AISI 316 - Polished surface - Type 1: with bayonet fitting and adjustable ring for flag mounting - Type 2: with ball head and eyelet for flag mounting.
- Anodized aluminum - 10° inclined - With knurled screw to secure the flagstick - 4-hole mounting. Version: 10° inclined Material: Anodized aluminum
- Ideal flagstick holder for the railing - Also suitable for transom mounting - Mounting plate with 8 holes - Mounting with 2 plastic clamps (screwed to the railing tube) - Niro Aisi 316 - with plastic can in the holder.
- Flagstick holder for installation - Mounting with countersunk screw - Visible surfaces polished -Stainless steel.
- Installation of flagstick holder - Niro AISI316, polished - oval shape, base 60 x 45 mm.
- Stable and shapely flagstick holder - AISI 316.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch