Your cart is empty
- To protect the main supply line to anchor winches, etc. ATTENTION: not a set - fuses and holders must be ordered individually!
Professional hot wire cutter for precisely cutting and cleanly welding synthetic cords and lines. With a 21 mm wide cutting tip and 60 W power, it's ideal for sailing, watersports, and rigging work.
Robust fender cover made of 2 mm thick neoprene for reliable protection of the hull and fender. Waterproof, durable and a perfect fit for Dan Fender models.
Robust stainless steel shroud adjuster in a heavy-duty design for dinghies and small sailboats. Three staggered rows of holes allow for precise adjustment of mast tilt and shroud tension – ideal for optimal sail trim and secure rigging in …
Waterproof 30-liter backpack for boating, water sports, and outdoor activities. Thanks to its IP66 rating, roll-top closure, and two-way sealing system, it reliably protects against water, sand, and dirt.
Extremely stretchy fleece undersuit for use on board and during water sports activities. It adapts perfectly to the body, even during extreme movements, and offers exceptional comfort.
Allpa thermomagnetic fuse 135A
Windex BirdSpike: Prevents birds from perching on the Windex Simple and quick attachment with new screw connection for the tip Protection at the tip to avoid injuries during mast work Exclusively for Windex 15"
"DF40A T Weight: ATS: 102 kg ATL 104 kg Shaft length: S- 381 cm L- 508 cm Propeller pitch: 9“-17” Color: Black (opt. white) Displacement: 941 cc Power (kW/hp): 29.4 / 40 Bore x stroke: 72.5 x 76 Gearbox: Mechanical Trim and tilt settings …
- Practical champagne bucket for the fine on-board party - incl. holder for pastries and champagne glasses (6 pcs., not included) - Material: methacrylate.
Connections: for 19 mm (¾") inlet hose, 25 mm (1") outlet hose Fuse size: 25 (amperes) Maximum current: 20 (amperes) Powerful centrifugal suction pump for shredding and evacuating waste Supplied with a separate pump for use with seawater/r …
Made of stainless steel AISI 316; For fastening hatches or cabinet doors
- The microfibre filler MF is used as a reinforcement and thickening additive - Makes a universally applicable adhesive - The microfibre filler offers good gap filling - Add between 4-18% by weight to the epoxy mixture.
- Doormat with anti-slip coating - Material: 100% latex and polyester. Version: Anker/Welcome ... Dimensions: 750x500mm
- Smooth, ergonomic, and easy-to-use buckle - Easy to open and close - For bags, sacks, tarpaulins, battery boxes, etc.
Lifelink rescue sling for the rapid recovery of persons overboard (MOB). Mounted in a PVC bag on the stern rail, with 36 m of floating line, robust PVC sling, and safety clip.
Maximum versatility, safety, and comfort on board with minimal space requirements • Combines the compact handling of an inflatable construction with the stability of a rigid platform • High-pressure drop-stitch technology for maximum rigid …
- Lubricant-based cleaner for cleaning the supply system of all types of gasoline and diesel systems - for engines with carburettor system or with electronic injection - Eliminates any water, impurities, rust, alcohol deposits, paraffin, b …
Polished stainless steel Parasol holder for umbrella poles up to 38 mm Ø Mounting on railings, railings, parapets vertical, horizontal, diagonal
The Allroundmarin Kiwi 260 in light grey with a high-pressure air floor combines comfort and lightweight design in one agile boat. Perfect for spontaneous excursions and use as a tender, it is quickly inflated and offers you a non-slip, firmly insulating standing surface. Enjoy the effortless setup and safe driving on the water.
- Consisting of neoprene fabrics of various sizes, a special adhesive, and various processing accessories.
Robust RIB inflatable boat with a stable aluminum hull and durable ORCA® Hypalon tubes. The double bottom ensures a dry stance on board, while the lightweight construction allows for strong performance even with small engines – ideal for cruising, swimming trips and sporty outings.
Suitable for the following motor/gearbox types: 40 ITALY/45 BODENSEE 50/50 BIGFOOT 4-STROKE - 45 BODENSEE (4-STROKE) 40/50 /45 BODENSEE/50 BIGFOOT 4-STROKE - 50 BIGFOOT (4-STROKE) 9.9/13.5/15 (323CC) 8/9.9/15 BODENSEE 4-STROKE - 8 (BODENSE …
YAMAHA SERVICE KIT F50/T50/F60/T60 (06&NEWER) + F70 (ALL YEARS) 100HRS (8M0222221)
Original Suzuki Maintenance Kit for DF60/DF70 Outboard Engine 2007 Content: 1x Repair Kit Water Pump 1x Oil Filter 4x Spark Plug 1x Shear Pin 2x Gasket 10x17x1.5 1x Gasket 12.5x20x2.5 1x Anode 1x Gasket 1x Fuel Filter Replaces the old part …
Suitable for the following Volvo Penta engine types: AQ100, AQ115 A, AQ115 B, AQ120, AQ130 A, AQ130 B, AQ130 C, AQ130 D, AQ90, AQ95, AQ95 A, BB100 A, BB115 A, BB115 B, BB115 C, BB120, BB120 A, BB30
- Shapely control element series When manoeuvring is necessary in difficult conditions or in confined spaces, perfect technology is required.
- Suitable for salt water.
- Made of robust, black PVC.
Dimension: 2000x80x65mm
Be the first to review this product.
No reviews yet.
No questions yet.
The fender tension belt for pole fenders is the flexible attachment for all dolphin fenders - The tension belt set is for attaching the dolphin fender to the dolphin.
Protects the boat from damage upon contact with the dock or mooring, the dock fender significantly dampens the impact, thus preventing damage to the boat upon contact with the boat fender, the boat can glide and remains maneuverable offers …
- Ideal for protecting edges and corners on floating jetties - Simple and flexible installation - Soft, abrasion-resistant PVC - Colour: white or navy blue - Versions in straight and for 90° angles.
The dolphin fender protects the boat from damage when entering and exiting the box - the boat is NOT STOPPED when it comes into contact with the fender mat on the pole, but glides along the fender and thus remains fully controllable - the …
- Slim minidock fender for fixed mounting on jetties, pontoons or quay walls - Vertical mounting with eight holes - Can be bent in the middle (results in an edge length of 2 x 475 mm) - Resistant and elastic PVC - Color: white.
- Short multi-dock fenders for high protection of the boat - Concave flattened on the bridge side for mounting - The horizontal and vertical fastening results in a very stable design - Colour: white - Material: PVC.
The dolphin hook can be easily stretched around any round or square dolphin with the dolphin strap - NO DRILLING, NO TOOLS - When changing berths, simply remove the dolphin hook - No damage to the dolphin - Extremely secure.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch