Your cart is empty
- PP multifilament, 3-strand twisted - buoyant all-round rope - 3-strand laid - easy to splice - retains its suppleness even after long use - Polypropylene multifilament according to DIN 83334/EN 699, heat-set, white - working stretch > 15 …
- Voluminous multi-dock fender for high protection of the boat - Concave flattened on the bridge side for mounting - The horizontal and vertical fastening results in a very stable design - Can be angled up to 90° for corner mounting - In t …
UV-resistant and waterproof RS railing pad made of high-quality acrylic fabric for optimal protection on board.
Sun visor for boating, sailing, and leisure. Effective sun protection for eyes and face with a pre-shaped visor.
Breathable regatta drysuit made from a robust 3-layer system for sailing and watersports. With reinforced knees and seat made of 600D polyester, latex seals at the neck, wrists and ankles, and a practical T-zip closure – ideal for cold and …
Allpa thermomagnetic fuse 135A
- Made of sturdy, blue plastic with hanging eyelets and Velcro fastener - for self-assembly. Dimensions: 340x230mm
"DF6A Weight: S- 24 kg L- 25 kg Shaft length: S- 381 cm L- 508 cm Propeller pitch: S & L: 7“ (optional 6”-7") Color: Black Displacement: 138 cc Power (kW/hp): 4.4 / 6 Bore x stroke: 60.4 x 48 Transmission: Mechanical Trim and tilt settings …
Compressor Built-in Refrigerator Top Loader This 40L refrigerator is specially designed for confined spaces.
The Jabsco replacement pump 12V is the ideal solution for quick replacement on board. Manufactured with a precise fit, it ensures a tight installation and reliable flushing processes.
Made of stainless steel AISI 316; For fastening hatches or cabinet doors
- Removes dirt and stains from boat and sail covers, bimini tops, etc. - Can be used on all materials - Simply pipe on and rub dry.
- Ashtray as a brass porthole in mahogany frame - elegant and very stable. Outer Ø: 15mm Weight: 0.6kg
- Made of flame-resistant, foamed, soft vinyl - Closed cells and homogeneous surface layer - No rotting, as moisture cannot penetrate the material - Therefore, no condensation on the walls.
Max. pipe length 6 meters. Material thickness: 2 mm Outer diameter: 20 mm
Robust bosun's chair made of high-quality, durable material for work on the mast and on board. Features metal triangular rings, a stable seat, and secure support.
- End cap to protect the slat pockets - Color: blue.
Robust bathing ladder; stainless steel steps, spacers and tubes; 3/4/5 steps.
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
The Allroundmarin Kiwi 300 is a spacious inflatable boat with a folding wooden floor that also securely accommodates two people. It is excellently suited for use on larger lakes, as it runs very true to track due to its length. This model is the ideal choice for anglers who sit together or need to safely transport a lot of material across the water.
Robust RIB inflatable boat with a stable aluminum hull and durable ORCA® Hypalon tubes. The double bottom ensures a dry stance on board, while the lightweight construction allows for strong performance even with small engines – ideal for cruising, swimming trips and sporty outings.
1.8m Smartcraft data cable without resistors or additional connectors. Provides a data connection between Smartcraft system and CAN bus components CAN Data Cable, 10 Pin
YAMAHA SERVICE KIT F50/F60/T60 (05) + F115 (00-05) 100HRS (8M0222280)
Suitable for the following Volvo Penta engines/transmissions KAD43P-B KAMD44P-B KAMD44P-C KAD300-A KAD42B KAD42P-A KAD43P-A KAD44P KAD44P-B KAD44P-C KAMD300-A KAMD43P KAMD43P-A KAMD44P-A KAMD42B KAMD42P-A KAMD43P-B
- Bow thruster motor unit - 12 and 24 V - 4.4 kW - 2 propellers (5 blades) - 185 mm tunnel diameter - 80 kg thrust - for boats from 35 to 48 feet - Gearbox: seawater-resistant bronze, fully CNC machined, 100% dimensional accuracy - Encapsu …
- Suitable for salt water.
Modular seat base frame Beta from Zwaardvis for flexible seat and table base structures on board. Can be adjusted with a 76 to 60 mm tube or as a fixed length with a 60 mm tube.
High-quality sleeve for turnbuckles made of polished AISI 316 stainless steel. Features opposing right- and left-hand threads for precise shroud tension adjustment. Read more
Be the first to review this product.
No reviews yet.
No questions yet.
High-quality turnbuckle made of AISI 316 stainless steel with a polished finish. Ideal for precisely tensioning shrouds and wire ropes in sailing applications.
High-quality nut for turnbuckles made of rustproof AISI 316 stainless steel. Available in metric and imperial threads, both left- and right-handed.
APEX turnbuckle without terminal, made of polished AISI 316L stainless steel with bronze inserts and inch threads.
High-quality turnbuckle with fork terminal made of polished AISI 316 stainless steel. Robust, seawater-resistant design for standing rigging and precise tensioning work on shrouds and stays.
High-quality turnbuckle with toggle and wire rope terminal for precise tensioning of shrouds and stays in sailing applications.
High-quality turnbuckle with fork-to-fork thread, made of AISI 316 stainless steel. Polished surface for maximum corrosion resistance in marine applications.
High-quality turnbuckle with fork terminal made of polished AISI 316 stainless steel. Ideal for standing rigging on sailboats and yachts.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch